Nhựa tẩy nòng Lusin Clean G320

Giá: 0

Mã sản phẩm: G320

Hãng sản xuất: Chemtrend

Tình trạng: Còn hàng

Mô tả

Nhựa tẩy nòng Lusin Clean G320

Chi tiết sản phẩm:

Benefits
Suitable for all plastics up to a processing temperature of
320°C/608°F
Low consumption – economical
Can be used in the food industry
Odorless during application
Rapid cleaning effect
Suitable as cleaner in master batch production
Also suitable for cleaning injection machines

Description
Lusin®
Clean G 320 is a ready-to-use granular cleaning compound for the heads, screws, and cylinders of extruders with mono or double-screw. The compound consists of high grade plastic with additives and contains no abrasives. Lusin® Clean G 320 is suitable for use at a temperature up to 320°C/608°F. It is not necessary to remove the filters.
Application/Instructions Lusin® Clean G 320, when applied at the correct material temperature, removes crusts and deposits from screw, cylinder and head of extruders. After the cleaning process with Lusin® Clean G 320, the screw can be removed very easily. Cleaning with Lusin® Clean G 320 is effective, quick and reduces the scrap rate. Processing is carried out according to the following procedure.
1. For dosage, refer to Dosage Table above.
2. Empty cylinder.

3. Plasticize Lusin® Clean G 320 with high screw velocity at the same temperature as the previous material.
4. As soon as Lusin® Clean G 320 starts to emerge from the extruder head, stop the screw for 5-10 minutes.
5. Remove all the Lusin® Clean G320 from the cylinder and process the new material.
6. To remove extreme contamination, repeat the cleaning process.
7. If possible, close the gas exhaust system.